New Belt Buckles

Have you ever wondered how the Dickens remove your old belt buckle and replace it with the beautiful new belt buckle you received? This could be a problem more embarrassing if you plan to change the loop a belt made purposely with a permanent loop in place. However, interchangeable belt buckles are crafted with a metal buckle on the back of the loop, and a metal pin extending perpendicular to the back of the loop, as well. The belt, in turn, is usually made of heavy leather, with at least two (2) metal snaps running at one end where the leather belt was slipped into the metal loop the loop.

To start, remove the old belt buckle. First, ask your belt buckle belt , face down. Locate the belt engages behind the loop area. Pull the short end of the belt off - do not be shy - they are intended to detach! Then unroll the carpet, lay it flat and slide the belt buckle.

Then, in the same way, but in reverse, put the belt with a new belt buckle . Take your new belt loop and place it face down with the metal loop closest to the end of the strip containing the snaps. Drag the end of the belt into the buckle, metal loop until the loop the loop reaches the front section of the folded belt. Now fold this section of the belt back to its original position, corresponding to pressure and press them together - Snap! And voila! The new belt loop is now safe to your belt!